Academic Degrees

PhD, 2014, Mechanical, Automotive & Materials Engineering, University of Windsor, Canada;

MSc, 2011, Mechanical, Automotive & Materials Engineering, University of Windsor, Canada;

Bachelor, 2006, Materials Forming and Control Engineering, Huazhong University of Science and Technology, Wuhan, China.

Professional Experience

Lecturer (2017-now); School of Joining and electronic packaging, Huazhong University of Science and Technology.

Selected Publications

1. ShangZhu, ShiqianSong, YingChen*, FengZhao, WenxinYang, ZhiwenLi, YushengShi, ShengfuYu, Effect of in-situ Al2O3 on tensile strength and ductility of AlSi10Mg alloy fabricated by selective laser melting, Materials Letters, 308(2022)131108.

2. Ying Chen, Shiqian Song, Shang Zhu,* Xiaosheng Cui, Feng Zhao. Selective laser remelting of in-situ Al2O3 particles reinforced AlSi10Mg matrix composite: Densification, microstructure and microhardness. Vacuum 191(2021)110365.

3. Chen-Hua Lou, An-Nan Chen, Lu Lu, Jia-Min Wu⁎, Li-Jin Cheng, Rong-Zhen Liu, Shuang Chen, Ying Chen*, Yu-Sheng Shi, Chen-Hui Li. Highly enhanced dielectric loss of MgO-doped Ba0.67Sr0.33TiO3 ceramics prepared by a non-contamination DCC-HVCI method. Journal of European Ceramic Society 39(2019)4149-4155.

4. Jia-Min Wu, Yi-Xin Ma, Ying Chen*, Li-Jin Cheng, An-Nan Chen, Rong-Zhen Liu, Chen-Hui Li, Yu-Sheng Shi, Jian-Ping Lin⁎, Preparation of Si3N4 ceramics by aqueous gelcasting using non-toxic agar powder as gelling agent without cooling crosslink process, Ceramics International, 45(2019)20961-20966.

5. An-Nan Chen, Feng Gao, Meng Li, Jia-Min Wu*, Li-Jin Cheng, Rong-Zhen Liu, Ying Chen*, Shi-Feng Wen, Chen-Hui Li, Yu-Sheng Shi. Mullite ceramic foams with controlled pore structures and low thermal conductivity prepared by SLS using core-shell structured polyamide12/FAHSs composites. Ceramics International, 2019, 45(12), 15538-15546.

6. Jia-Min Wu, Shan-Shan Liu, Meng-Yue Liu, Ying Chen*, An-Nan Chen, Meng Li, Rong-Zhen Liu*, Yu-Sheng Shi, Chen-Hui Li. Preparation of dense 0.9Al2O3–0.1TiO2 ceramics with highly improved microwave dielectric properties by a noncontaminated DCC method. Ceramic International, 44 (2018) 22205-22211.

7. Jia-Min WU, Huan XIAO, Meng-Yue LIU, Ying CHEN*, Yi-Xin MA, Li-Jin CHENG*, Yu-Sheng SHI. Study of 0.9Al2O3–0.1TiO2 ceramics prepared by a novel DCC-HVCI method[J]. Journal of Advanced Ceramics, 2018:1-8.

8. Y. Chen, J-M Wu*, X. Nie, S. Yu, Study on failure mechanisms of DLC coated Ti6Al4V and CoCr under cyclic high combined contact stress. Journal of Alloys and Compounds, 688 (2016): 964-973.

9. J. Wu, Y. Chen*, X. Zhang, Q. Huang, J Yang, Y. Shi, Phase evolution and properties of novel Al2O3‐based poly‐hollow microsphere (PHM) ceramics, Journal of Advanced Ceramics, 5(2) (2016) 176-182.

10. S.F. Yu*, N. Yan, and Y. Chen*, Inclusions and Microstructure of Ce-Added Weld Metal Coarse Grain Heat-Affected Zone in Twin-Wire Submerged-Arc Welding, Journal of Materials Engineering and Performance, 25 (2016) 2445-2453. Published: June, 2016

11. Y. Chen, T. Cheng, X. Nie*, Wear failure behaviour of titanium-based oxide coatings on a titanium alloy under impact and sliding forces. Journal of Alloys and Compounds, 578（2013）336-344. Published: NOV 25 2013.

12. Y. Chen, X. Nie*, Study on fatigue and wear behaviors of a TiN coating using an inclined impact-sliding test. Surface & Coating Technology, 206（2011）1977-1982. Published: DEC 25 2011

13. Y. Chen, X. Nie*, D. Northwood, Investigation of Plasma Electrolytic Oxidation (PEO) coatings on a Zr-2. 5Nb alloy using high temperature/pressure autoclave and tribological tests. Surface & Coating Technology, 205（2010）1774-1782. Published: DEC 15 2010 

14. Y. Chen, X. Nie*, A. Leyland, J. Housden, A. Matthews, Substrate and bonding layer effects on performance of DLC and TiN biomedical coatings in Hank's solutions under cyclic impact-sliding loads. Surface & Coating Technology, 237（2013）219-229.

15. Y. Chen, X. Nie, Study of the fatigue wear behaviors of a tungsten carbide diamond-like carbon coating on 316L stainless steel. Journal of Vacuum Science and Technology A, 30 (2012) 051506. Published: SEP 2012

Awards

2020 Science and Technology Innovation in Hubei Province (First Prize): Independent research, development and industrialization of key technologies of automated hot die forging production line.

2019 China Machinery Industry Science and Technology Award(Second Prize)Multi-material wire arc additive manufacturing technology and its application in hot-forging die manufacturing/remanufacturing

Courses Taught

Mold materials and surface strengthening

Physics of materials processing

Projects

National Science Foundation for Young Scientists of China ( Grant No. 51501066). Effects of carbides/nitrides to the adhesion property of CrN coated carbon-nitrogen alloying mold steel, 2016/01–2018/12.

Sub-project of National key research and development program(Grant No. 2018YFB1106203) Precise coloring techniques and tools of 3D printed components, 2018/05-2021/04.